The product is designed for welding painting surface made of heat-melted material, such as PVC, PE fabric.
Know to all of the advertising painting industrial, that the way to bond disjunct advertising poster surfaces,
we usuallyuse thesingle-moment glue. such as 502 glue to join them together, but the means have a lot of disadvantages, such as:
(1) Almost all kinds of these bonding agglutinant are harmful chemical industrial products, normally are much harmful on human health,
may cause many diseases.
(2) When work, the operation is slow and is not too satisfied in strength with the glue, to get a good strength, usually we must proceed a
special handling, such as whet the surface to make the surface not smoothed.
(3)The air temperature may influence the stick strength, in low temperature environment, the bond effect may turn into badness.
Bond up disjunct flat painting surface made of heat-melted material, such as PVC fabric, PE canvas, outdoor poster banner, plastic surface,
Sailcloth...etc. Also used to laminate and enhance edge of the painting pieces.
1)Before hemming or welding,leave 30-40mm wide overlap edge for connecting the two disjunct surface pieces, immobilise
both ends of each disjunct pieces with something such as stick belt or clamp.
2)Turn on the power, according to quality and thickness of the material, consider the ground circumstance, set the proper temperature and speed,
adjust the suitable hot-air blowing rate, prepare hot up about 2 minutes.
3)Bring up the machine, place the pressing roll at the end of the overlap edge.
4)Handle the welding gun to left down, insert the spout into the gap of the two overlap pieces, then the machine start running and seaming
5)During welding, use the gripe to align the moving direction, Let the upper pieces edge be in touch with the inner side of the welding spouts neck
6)After the machine go pass the overlap edge to the end, the two disjunct pieces woll be joined into one. Then handle up the welding gun to right for stop.
7)The machine will turn into sleepy mode automaticly for saving energy, if no operation in 15 minutes (auto hot off at the 12th minute,
auto power off at the 15th minute). press option/choice key to awake (or turn off the power, restart it 10 seconds later).
8)Notice: To prolong the electrothermal heater after work, it is strongly advised that cooling the heater whenever possible, handle and lift the welding
gun away the pieces or ground, adjust the temperature value to lowest, turn off the power 5 minutes later; In case of the power suddenly be off,
should handle the welding gun away firstly and close down the temperature knob, nextly consider the problem of power supply.
To get better satisfied bonding effect, the ground of the overlap pieces should be smoothly, hard and heat-proof. we suggest that the operater
may do some more test and practise using some samples of the pieces to get the suitable speed and temperature and hot-air blowing ratem
before operate it for seaming formally.
1)Improper operation and mend are forbidden;to avoid fire disaster and electric shock, must ensure safely, do not use if anything unusual found.
2)The working place should be flat and the floor must have enough strength to suport the weight of the machine. Keep the workingplace clean
and ordered, enough light, without humidity, do not use wet things to touch the machine.
3)It needs standard repairing tools by qualified workers in case of damage, do not mend without professional knowledge.
Be sure power is shut down before repaire.
4)Stop the machine firstly, shut down the power, if any trouble happens at work.
5)For safe seaming, beginners should process more practice firstly, start operating formally after be proficient in using it.
Be sure the power supply is off after use.
6)For safety and longgevity of the machine, don't let it work overtime
7)Children should be kept away the machine.
1)Check up the machine if there is damage on it and shortage of the parts when open the pack, contact the iocal agent soonif have any problem.
2)Don't discard anything of the package, move it carefully and lightly wherever possible.
3)Clean the welding spout with hard brush after cool down.
4)To prevent rustiness, the store place should be dry and air circulating.
5)Pay attention on dust or something blocks the inhaling fence of the fanner, clean it out in time for protection.
Then fanner and heater is warranted as expendable, be careful in use.
1. We Ship to Worldwide, except China, Belgium, Luxembourg, Italy, Croatia, Nigeria, Hong Kong, and we do not
2. Orders processed within 24-48 hours of payment verification.
3. Before buying, Please make sure your address is correct. Or not, please correct it before payment.
4. If you have not received your shipment within 30 days from payment, please contact us. We will track the
shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
5. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
1. We accept Alipay,. All major credit cards are accepted through secure payment processor ESCROW.
2. Payment must be made within 3 days of order.
3. If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.
1. 12 months Manufacturer's Warranty . Buy with confidence!
2. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
3. Defective items MUST BE reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number.
1. We are not responsible for any custom duty or import tax.
2. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them!
3. All email will be answered within One working day. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible.
4. You agree to all of the above-listed policies upon bidding on and winning this auction!